welcome aboard part 2.

Irwindale Practice on board.

Take a ride around Toyota's Irwindale Speedway.

on board camera footage. PEACE!!! =)

tease pic.

its going to go lower. werrdd

Missile.

Some more updates.

This last Tuesday, I went to Megan Racing to buy some coilovers for the cressida. I need shocks badly because cut springs wont cut it. Since I am on a budget, Megans are a great deal!!!

The only thing that was kind of a pain was the fact that I would have to cut my stock shocks to get the spindle part of the assembly to weld with the coilovers.

Since i am not a great welder, I called Scott who owns and runs SPD Metal Works in Anaheim to do some fabbing for me. He is superior at metal work and I would not go to anyone else. He is also the main man who built Dai's IS350 and also Dai's 9-Day miracle V8 S13.

Anyway, you can check out his website here: SPD METAL WORKS

So..I went to SPD Metal Works on Thursday to get the fabbing done! I also took my open differential to get that locked as well! Here are some pictures.

Meet Scott.

Today, now that i have my stuff welded, I spent some time installing some goodies i have been buying. First I installed the Serial Nine Subframe bushings. You may not be able to tell from the picture but the bushings are in there. They actually raise the subframe up closer to the body too.

 

Next I installed the differential bushings. This was actually harder than i thought because i didnt have a press to punch the old bushings out. I used an air hammer and hammered the crap out of it. After about 30 minutes of banging away, they came out and in went the new serial nine diff bushings.

Now my rear end is solid. Instant sideways drifting with machine gun clutch kicks!!

After that, i installed my coilovers. Rear first then front.

Along with the coilovers, I also put in the RCAs that had been sitting around my trunk.
Lastly, i bolted up the R32 brake calipers but i forgot about rotors so that will come next.

I need to order a few parts and make trips to Baker Precision to get some brake lines.

Hopefully by next wednesday, my car will be off the lift and on the ground with my wheels!!

2J, Where are you??